manualshive.com logo in svg

Rose electronics UC1-1X16U/E, Installation And Operation Manual

Share
Download
Rose electronics UC1-1X16U/E Installation And Operation Manual Download Page 58

SERIAL DEVICE SUPPORT 

52

 

ULTRACONSOLE USERS MANUAL 

 

Serial device support 

The serial feature allows you to connect a KVM station to a serial 
device such as the serial port on a Unix or Sun computer, a 
communication device, or any device with a serial port. The serial 
device is connected to the DB25F CPU port on the UltraConsole with a 
serial cable (See Appendix C for serial cable part numbers). Any CPU 
port can be configured to be a serial port. When you switch to that port, 
you are connected to the serial device and can access it as you 
normally would.  
 
To configure a CPU port for a serial application, call up the main menu 
([Ctrl] – F12), and then select computer and press [Enter].  From the 
configure computer menu, use the up/down arrow keys to select the 
desired computer to configure for serial, then use the left arrow key and 
select the keyboard field for the selected computer and press [Enter].  
A selection box will display listing the supported choices.  Use the 
up/down arrow keys and select the serial baud rate to configure the 
CPU port for and press [Enter].  Save the changes to flash memory.  
Once saved, that CPU port is configured for serial support.  
(See Figure 21) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for UC1-1X16U/E

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands