ULTRACONSOLE USERS MANUAL
21
8.
Boot the computer if power is not applied. You should see the
boot up sequence on the KVM monitor. If the computer was
connected to a pre-configured CPU port with power applied, you
should see that computers video.
9.
Verify that the keyboard, video, and mouse on the connected
computer function properly before proceeding.
10.
Switch the KVM station to the next sequential CPU port as
explained in step 6 and perform steps 7 – 9 for this computer and
for the remaining computers.
11.
Connect other KVM stations as needed to the UltraConsole
switch and verify they operate properly. (See appendix F)
This completes the basic installation of a “RING” configuration.
A KVM station connected to any UltraConsole switch can connect to
any computer in the “RING”. Other configuration parameters can be
set-up for the system, computers, KVM stations, users, profiles, groups,
and languages. See the “Configuration menu” section for instructions
on setting up these items.
These installation steps are a guideline for installing multiple switches
in a “RING” topology. Following these steps verify, that through the
installation process, everything functions properly.
Please refer to the Operations section for using the UltraConsole
switch.
