manualshive.com logo in svg

Rose electronics UC1-1X16U/E, Installation And Operation Manual

Share
Download
Rose electronics UC1-1X16U/E Installation And Operation Manual Download Page 55

 

ULTRACONSOLE USERS MANUAL 

49 

 

You must change or verify that the computer’s baud rate matches the 
UltraConsole baud rate.  If you are using Windows HyperTerminal on 
your computer, first disconnect from the UltraConsole switch by clicking 
on the HyperTerminal disconnect ICON.  Change the baud rate to 
match the UltraConsole switch’s baud rate, then connect to the 
UltraConsole switch by clicking on the call ICON. Press [Enter] and the 
serial menu should display in the HyperTerminal window. 

 
Option 3. Receive new main program or kernel from serial port 
(This card only) 

 
When new main or kernel programs are available, they can be obtained 
from Rose Electronics or downloaded from our web site at 
www.rose.com.  The diagnostic screen that is displayed when the 
UltraConsole switch is first turned on shows the Kernel and main 
program version that is presently installed. 
You cannot update the flash memory using only a display terminal; you 
must use a standalone computer or Notebook and the new main or 
kernel program saved on that computer.  
It is recommended that this procedure be done on UltraConsole #1, 
RS232 port #1. (Lower right RJ12 connector) 
 
To load a flash upgrade file, type 3 in the Enter choice field of the serial 
options menu. The following message will appear: 
 
 
 
Send the program or kernel file from your computer to the UltraConsole 
using ASCII text file protocol. From HyperTerminal, click on “Transfer” 
and select “Send Text File”. The “Send Text File” dialog box will 
display.  Enter the file name of the updated firmware file into the File 
Name box and click “Open”.  The file transfer function will start.  While 
the file is being sent, periods are sent to indicate the copying progress. 
Once the file has been sent, you will see the message: 
 
 

 
 
 

 
After the flash memory is programmed, the serial menu will display. 
 
Updating the firmware or kernel programs does not change any of the 
custom settings that have been made. 
 

Waiting for file......................... 

Receive successful 
Flash programming......................... 
Flash programming successful  

Summary of Contents for UC1-1X16U/E

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands