ULTRACONSOLE USERS MANUAL
37
Configure Group menu
Configure Group
Computer
Group 1
1 Computer
1
+
+ + + + + + + + + + + + + + + +
2 Computer
2 + + + + + + + + + + + + + + + + +
3 Computer
3 + + + + + + + + + + + + + + + + +
4 Computer
4 + + + + + + + + + + + + + + + + +
5 Computer
5 + + + + + + + + + + + + + + + + +
6 Computer
6 + + + + + + + + + + + + + + + + +
7 Computer
7 + + + + + + + + + + + + + + + + +
8 Computer
8 + + + + + + + + + + + + + + + + +
9 Computer 9 + + + + + + + + + + + + + + + + +
10 Computer
10 + + + + + + + + + + + + + + + + +
11 Computer
11
+ + + + + + + + + + + + + + + + +
12 Computer
12 + + + + + + + + + + + + + + + + +
13 Computer
13 + + + + + + + + + + + + + + + + +
14 Computer
14 + + + + + + + + + + + + + + + + +
15 Computer
15 + + + + + + + + + + + + + + + + +
16 Computer
16
+ + + + + + + + + + + + + + + + +
SPACE BAR adds/removes computer from group Enter renames group
Page up/down more com computer belongs to group
Figure 11. Configure group menu
The configure group menu allows you to assign a computer to one or
more groups. Users that are assigned a profile that contains a specific
group name can only access the computers within that group. It they try
to access a computer that is not within the assigned group, the error
“Not in access group” will display in the connect box. The left computer
column displays the computer names. To change a group name, select
it and press [Enter].
This menu is an array of groups (x) and computers (y). Moving the
arrow key to the right from one plus (+) to another plus (+) for a
selected computer name changes to the next group. A plus (+) means
the computer belongs to that group, a blank means the computer is not
in that group and cannot be accessed by a user assigned to this group.
To change the group membership, select the group for a selected
computer and press the space bar to toggle between the two states, +
or blank. Default: (All computers in all groups)