Rose electronics Orion X OXC-08-GBIC/8FM Installation And Operation Manual Download Page 24

Page: 24 / 140

Orion X Installation and Operations Manual

Control through the Java Tool

Requirements

The following requirements have to be met to use the Java Tool:

Computer with an installed Java Environment (JRE, version 1.6 or higher)

Java Tool software

Available network connection between the computer running the Java Tool and the matrix

Contact the system administrator concerning JRE and the network connection.

Installation of the Java Tool

The Java Tool is available as a single executable program file that does not require a separate installation.



Copy the tool to a directory on the computer.

If the Java Tool was not provided, contact Rose Electronics.

Computer Connection to the Matrix

Use a crossover network cable for a direct connection between a computer and the matrix, or a standard CATx

cable for a connection through a switch or hub.

Do not use a network connection that is primarily used to transmit audio data between the Java Tool and the

matrix.



Use the appropriate network cable(s) to make the desired connections between the RJ45 ports of the

computer and the CPU board of the matrix.

Starting the Java Tool



Open the Java Tool by double clicking the program icon or selecting the program and pressing the

keyboard <Enter> key.

Connecting to the Matrix

At least FTP rights are required.

1. Open the Java Tool.

2. Select

Matrix > Connect

in the menu bar.

3. Enter the IP address of the matrix in the pop-up input field as set up in the network configuration of the Orion

4. Enter the user name and password for the Orion X.

5. Confirm the inputs with the

button or select

Cancel

to abort login.

Summary of Contents for Orion X OXC-08-GBIC/8FM













































































































































Search results

Summary of Contents for Orion X OXC-08-GBIC/8FM

Reviews:

Related manuals for Orion X OXC-08-GBIC/8FM

Brands by name

Popular brands

Rose electronics Orion X OXC-08-GBIC/8FM, Installation And Operation Manual

Search results

Summary of Contents for Orion X OXC-08-GBIC/8FM

Reviews:

Related manuals for Orion X OXC-08-GBIC/8FM

Brands by name

Popular brands