Rose electronics Orion X OXC-08-GBIC/8FM Installation And Operation Manual Download Page 66

Page: 66 / 140

Orion X Installation and Operations Manual

In order to change the Extender OSD settings, proceed as follows:

1. Select the console extender in the

EXT Units

list for which Extender OSD settings are to be modified.

2. Confirm the selection by pressing the <Enter> key, and the respective console extender will be enabled

for editing.

3. Make the desired modifications to the Extender OSD Data settings.

4. Click the

Okay

button to confirm the changes.

Modifying Extender OSD Settings through the Java Tool



Select

Definition > EXT Units

in the task area.

Figure 51. Modifying Extender OSD Settings through the Java Tool

In order to change the Extender OSD settings, proceed as follows:

1. Select the console extender in the

EXT Units

list for which Extender OSD settings are to be modified.

2. Click the

Extender OSD Data

tab to open it.

3. Modify the desired settings and confirm by clicking the

Apply

button.

Summary of Contents for Orion X OXC-08-GBIC/8FM













































































































































Search results

Summary of Contents for Orion X OXC-08-GBIC/8FM

Reviews:

Related manuals for Orion X OXC-08-GBIC/8FM

Brands by name

Popular brands

Rose electronics Orion X OXC-08-GBIC/8FM, Installation And Operation Manual

Search results

Summary of Contents for Orion X OXC-08-GBIC/8FM

Reviews:

Related manuals for Orion X OXC-08-GBIC/8FM

Brands by name

Popular brands