Rose electronics Orion X OXC-08-GBIC/8FM Installation And Operation Manual Download Page 92

Page: 92 / 140

OPERATION

Orion X Installation and Operations Manual

Operation

The Orion X can be operated in three different ways:

1. Direct Switching through a keyboard connected to a CON port

using 'Hot Keys' to switch between as many as 16 favorites

using 'Hot Keys' to invoke switching macros

2. OSD Switching using 'Hot Keys' to display the OSD and then selecting from the entire range of

CPUs the console or user can access

through a keyboard connected directly to the CPU board of the matrix

through a keyboard connected to a CON port

3. External Switching Commands

from an external computer running the Java Tool (network connection required)

through a third-party media controller (network or serial connection required)

Operating the Orion X with 'Hot Keys'

Several operations on the Orion X can be performed using the ‘Hot Keys’ at a console keyboard, as described

below.

Direct Switching

Direct switching by 'Hot Keys' on a keyboard is the quickest way for a user to switch a console between

different CPUs in their favorites list. It is possible to switch video, keyboard and mouse together, or just the

video.

Direct Switching of Video, Keyboard and Mouse

1. Start Command Mode with the 'Hot Key' sequence. The

Caps Lock

and

Scroll Lock

keyboard LEDs

will flash when Command Mode is activated.

2. Enter the index number of the new CPU from the list of favorites and confirm with <Enter>.

Command Mode is closed and the console is connected to the new CPU with complete control.

Example

: Switch video, keyboard and mouse to number 7 in the favorites list using the default hot key

Note:

The fastest switching will be achieved when identical mice, keyboards and monitors are used at all

consoles. This contributes to a smooth and seamless direct switching of the matrix.

Direct Switching of Video, Keyboard and Mouse in Private Mode

1. Start Command Mode with the 'Hot Key'. The

Caps Lock

and

Scroll Lock

keyboard LEDs will flash

when Command Mode is activated.

2. Enter the index number of the new CPU from the list of favorites and confirm with <left Shift>+<Enter>.

Command Mode is closed and the console is connected to the new CPU with complete control in

Private Mode

Example

: Switch video, keyboard and mouse to number 3 in the favorites list in

Private Mode

using the

default hot key: <’left Shift’>, <’left Shift’>, <3>, <left Shift>+<Enter>

Direct Switching of Video Only

1. Start Command Mode with the 'Hot Key'. The

Caps Lock

and

Scroll Lock

keyboard LEDs will flash

when Command Mode is activated.

2. Enter the index number of the new CPU from the list of favorites and confirm with <Space>.

Command Mode is closed and the console is connected to the new CPU with video only.

Example:

Switching to number 1 in the favorites list with video only using default hot key

Summary of Contents for Orion X OXC-08-GBIC/8FM













































































































































Search results

Summary of Contents for Orion X OXC-08-GBIC/8FM

Reviews:

Related manuals for Orion X OXC-08-GBIC/8FM

Brands by name

Popular brands

Rose electronics Orion X OXC-08-GBIC/8FM, Installation And Operation Manual

Search results

Summary of Contents for Orion X OXC-08-GBIC/8FM

Reviews:

Related manuals for Orion X OXC-08-GBIC/8FM

Brands by name

Popular brands