Rose electronics Orion X OXC-08-GBIC/8FM Installation And Operation Manual Download Page 30

Page: 30 / 140

Orion X Installation and Operations Manual

Assignment

CPU specific or console specific assignments can be made on the Orion X.

CPU specific assignments can be made by attaching virtual CPUs to real CPUs.

Console specific assignments can be made by attaching virtual consoles to real consoles.

Virtual CPU

Virtual CPUs can be assigned to real CPUs in this menu.

This simplifies the process of switching several consoles to the same CPU. If several consoles are connected

to a virtual CPU, which is then assigned to a real CPU, the real CPU needs to be changed just once, and all

consoles will receive the video signal of the new CPU.

This can be done through the OSD or the Java Tool.

Assignment through the OSD



Select

Assignments > Virtual CPU devices

in the main menu.

Figure 16. Virtual CPU Devices Assignment through the OSD

To make an assignment, proceed as follows:

1. Select the virtual CPU in the

Virtual Devices

list that is to be assigned to a real CPU.

2. Press the

Edit

button.

3. Select the CPU in the

Real Devices

list that is to be assigned to the selected virtual CPU.

4. Press the

Okay

button to confirm the assignment.

Only one virtual CPU can be assigned to a real CPU.

Summary of Contents for Orion X OXC-08-GBIC/8FM













































































































































Search results

Summary of Contents for Orion X OXC-08-GBIC/8FM

Reviews:

Related manuals for Orion X OXC-08-GBIC/8FM

Brands by name

Popular brands

Rose electronics Orion X OXC-08-GBIC/8FM, Installation And Operation Manual

Search results

Summary of Contents for Orion X OXC-08-GBIC/8FM

Reviews:

Related manuals for Orion X OXC-08-GBIC/8FM

Brands by name

Popular brands