5 Configure crowdbeamer
To
(page 29).
5.1 The Status page
This page shows the current status of the device. This page is always accessible. To access the other
configuration pages you need an admin password. If you need to recover the password click on
[Password recovery].
Password recovery
Click on this button if you have forgotten or need to change the administrator's password.
1.
Enter the activation key that was assigned to this device. This was provided during the
(page 18).
2.
Enter the new admin password. It is recommended that you use a "strong" password i.e. at least
8 characters which includes upper and lower case letters as well as numbers and other keyboard
characters arranged randomly.
3.
Confirm the password you have just entered.
4.
Click [Save].
Video status
Indicates the current video status. It corresponds to what is shown on the OLED display under
VIDEO
(though you may need to refresh this page to see the latest status).
Possible values are:
streaming
: video being transmitted.
NONE
: the device has no input connected.
blocked
: the sharing of the presenter's screen had been
(page 23).
Input Resolution
The screen resolution of the presenter's device.
Current input
The type of input connection. This is also indicated on the OLED display on the device under
IN
.
Possible values are:
HDMI
VGA
Current output
The type of output connection. This is also indicated on the OLED display on the device under
OUT
.
Possible values are:
HDMI
VGA
-
NONE
SW version
The current version of the installed software.
FW version
The current firmware version. See also
(page 14).
Fan speed
The current fan speed as a percentage of the maximum.
26
crowdbeamer device manual
Version 1.2
©
RORYCO NV Last updated 2017-08-26
