Galaxy GHDX4 RAID iSCSI-SAS/SATA InstaHardware Reference Manual
28
d. The subsystem does not work well or you cannot get it
work according to this manual.
e. The subsystem has dropped and been damaged.
f.
The subsystem shows obvious signs of breakage.
Static-free Installation
Static electricity can damage the system’s electronic components. To
prevent ESD damage to any of the components, follow these
precautions before touching or handling them:
Discharge the static electricity accumulated in your body by
wearing an anti-static wristband.
Use antistatic strap during handling. Connect the equipment
end of the strap to an unfinished chassis surface.
Avoid carpets, plastic, vinyl, and styrofoam in your work area.
If the need should arise for carrying subsystem modules from
one place to another, carry them in a static shielding
container.
Avoid the contact between circuit boards and clothing.
Handle all components by holding their edges or metal
frames. Avoid touching the exposed circuitry on PCB boards
and connector pins.
General Installation Procedure
Following all the instructions provided below can save subsystem
installation time. Detailed, illustrated instructions for each component
are given in the following sections.
CAUTION!
To ensure that your system is correctly installed, please follow the
steps outlined below. If you follow these steps, installation will be
fast and efficient. If you do not follow these steps, you may
accidentally install the hardware incorrectly.
Step 1.
Unpack:
Unpack the subsystem and confirm that all
the components on the
Unpacking Checklist
have
been included.
Step 2.
Install an optional BBU:
If a BBU has been
separately purchased, it should be installed prior to
operating the subsystem.
