Galaxy GHDX4 RAID iSCSI-SAS/SATA InstaHardware Reference Manual
40
Drive Locations with and without the MUX Kit
Step 3.
Secure the disk drive with four (4) of the supplied 6/32
flat-head screws.
Step 4.
Once the hard drives are installed into drive trays,
install all drive trays into the enclosure. See detailed
instructions in the following section.
Drive Tray Installation
Once the hard drives have been secured within the drive trays, the
drive trays can be installed into the subsystem.
WARNING!
All drive trays must be installed into the enclosure even if they do
not contain a hard drive. If the trays are not installed into the
enclosure, the ventilation airflow will not be normalized and the
subsystem will overheat.
Step 1.
Make sure
the rotary bezel lock is in the unlocked
position
, i.e., the groove on its face is in a horizontal
orientation. If the groove is in a vertical position, as
shown in Error! Reference source not found.
,
then
the bezel lock is locked and the front bezel cannot be
opened.
Front View of an Individual Drive Tray
Step 2.
Open the front bezel on the drive tray.
) Push the
release button on the drive tray. The front bezel will
spring open.
Drive Tray Release Button
Step 3.
Align the drive tray with the slot
in which you wish
to insert it making sure that it is properly aligned
