Page 9
7.1.5
All support arms, but 2, may be
pushed into the aluminium profile from
the right hand side to the required
position and fastened with two screws
on each support.
We recommend a maximum distance
between the support arms of 60 cm in
order to obtain optimum stability.
7.1.6
The left hand side support arm may
be pushed into the profile, positioned
direct on top of the left leg and fasten
it.
7.1.8
Push the right-hand leg into the
groove of the bottom side of the
aluminium profile and fasten it in a
distance of 2,5 cm from the edge of
the aluminium.
7.1.7
For worktop length 105-300 cm an
additional motor must be mounted as
described.
Place the washer and stop ring between
the motor and the right-hand leg so that
the washer faces the leg.
Stop ring
7.1.9
Place the motors at the illustrated distance
from either end of the aluminium profile
and fasten them.
21,5 cm
18,5 cm
7.1.10
The right hand side support arm may
be pushed into the profile, positioned
direct on top of the left leg and fasten
it.
