Page 8
7
.
Mounting instructions
Prior to assembly check that all parts have been provided. See list of components, from
page 20. If supporting feet have been ordered, follow assembly of these under paragraph
for mounting of accessories first.
7.1
Assembly of frame
The equipment should always be assembled by competent personnel.
7.1.1 Push the left leg into the groove of the
lower side of the aluminium profile.
7.1.4
Push the motor with fittings onto
the spindle. If the motor is not
parallel with the leg then turn the
motor to vertical position, see
7.1.7
7.1.3 Push the connecting spindle
through the leg on the left side.
Push the stop ring onto the
connecting spindle so it faces the
leg.
Stop ring
7.1
.
2 Position the adjustable legs on the
aluminium profile
For frames with two legs, place one
leg on either side. For frames with
three legs, place the third leg at the
middle of the aluminium profile.
Secure each leg to the aluminium
profile with two bolts.
2,5 cm
recommended
Leg can move to the side
