Page 12
7.4.3 Fasten the worktop with
screws through the holes of
the support arms.
7.5.1 After placing the worktop on the
frame you may have to compensate
for the weight of the worktop if the
frame is no longer horizontal from
the wall to the front fascia.
7.6 Mounting the wooden front fascia
7.6.1 Fasten the wooden front fascia at
the required position under the
worktop by means of a clamp.
Press the front fascia fittings
forward against the wooden front
fascia and fasten with screws
from the inside.
7.5 Adjusting the worktop/ support arms
7.5.2 By means of the two lower screws of
each support arm the ”tilting” may
be adjusted.
Start by loosening the two screws
fastening the support arm to the
aluminium profile and adjust the two
lower screws to make the worktop
horizontal.
Finally retighten the two upper
screws.
Repeat this procedure for the
support arms in the middle.
Do not adjust the support arms
placed directly above the legs.
