Page 26
13.3 Service schedule, operation and maintenance
14. Trouble shooting
a) The frame seems loose or unstable
The screws assembling the frame have not been securely tightened.
Tighten all screws, cf. mounting instructions.
b) The worktop is not horizontal in relation to the wall
After installation of the frame the worktop will be loaded. This deflection may be balanced
by repeating item 7.5
”Adjusting the Support arms” of the mounting instructions.
Also check that the legs are vertical
– see item 7.2.
c) The frame cannot be height adjusted
1. Check mains and voltage to the control unit and that power is switched on
2. Check cables and plug-in connections between control box and motor/motors. If The control
box makes several click sounds the plug-in connections are not correct
3. Check cables and plug-in connections between control box and control switch
4. Check cable connections between safety stop and control box
5. Check safety stop has not been activated
6. If above does not solve the problem:
−
Dismount motor cable/cables from control box
−
Dismount netcable from control box and wait min. 5 sec.
−
Connect netcable
−
Connect motor cable/cables
−
Move frame to Lowest/bottom position for
“reset”
Service and maintenance
Serial No.:
Date:
Sign:
Remarks:
Service and maintenance
Serial No.:
Date:
Sign:
Remarks
:
Service and maintenance
Serial No.:
Date:
Sign:
Remarks
:
Service and maintenance
Serial No.:
Date:
Sign:
Remarks:
