Device functions
Page 48
RES-5008
Version 2
9.25
Error messages
The following table shows the assignment of the output error numbers to the errors that occur. The cause for
the errors and the necessary measures to remedy them are described.
The schematic circuit diagram in section 9.26 "Error areas and causes" on page 53 permits fast and efficient error
remedy.
The RESISTRON
®
Temperature Controller RES-5008 displays 13 voltage levels for error diagnosis via the actual
value output. Internally in the regulator, the error messages are differentiated in even more detail. 3-digit error
numbers are also displayed with the ROPEX-Visualisation software (
section 9.22 "USB-interface for visualis-
" on page 45). The error search can thus be performed even more effectively.
CAUTION
Evaluation of the actual value output for detection of an error message has to be done - e.g. in
the higher-order controller – with an adapted tolerance window, to avoid incorrect evaluations.
The tolerances of the actual value output must be observed (
