Ropex CIRUS UPT-6010 Operating Instructions Manual Download Page 38 | Manualshive

Page: 38 / 58

background image

Device functions

Seite 38

UPT-6010

Version 2

8.8.1

Home page

This page contains general product information under "Device Information", for instance the product name, serial
number, firmware version, MAC address, and real-time Ethernet protocol. You can also download the correct
device description file for your product here (



section 8.3 "Device master file (GSDML)" on page 22). No Internet

connection is necessary to do this because the file is already stored in the device’s internal memory.

8.8.2

Status page

This page provides an overview of the current controller status.
"Online" indicates whether a connection has been set up to the PLC.
The inputs (



section 8.5 "Input data" on page 24) are shown in the left-hand column, the outputs (



"Output data" on page 26) in the middle column, and the current status of all device LEDs (



section 8.1 "LEDs

and controls" on page 21) in the right-hand column.

8.8.3

Parameters / Counters page

This page shows all parameter values received by the temperature controller from the PROFINET controller. If the
parameters have been changed using acyclic services, these changes are also indicated here.
For the meanings of the parameter data, refer to section 8.7 "Parameter data" on page 29.

«
...
36
37
38
39
40
...
»

Summary of Contents for CIRUS UPT-6010



























































Reviews:

No comments

Related manuals for CIRUS UPT-6010

Brand: Panasonic Pages: 45

Brand: Eaton Pages: 2

Brand: Eaton Pages: 2

PowerXL DX-NET-ETHERCAT-2

Brand: Eaton Pages: 3

Brand: Eaton Pages: 100

Brand: Fancom Pages: 31

Brand: 3M Pages: 90

Brand: Febco Pages: 12

Brand: GameSir Pages: 8

Brand: Game ready Pages: 21

Brand: VAMP Pages: 304

Brand: Tactical Pages: 8

Brand: Maestra Pages: 22

Brand: Watlow Pages: 59

Tekmar WiFi Snow Melting Control 670

Brand: Watts Pages: 48

Brand: Vacon Pages: 132

Brand: Yamaha Pages: 92

Brand: Measurement Computing Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands