background image

FRANÇAIS

ENGLISH

17

PARTS LIST

Please refer to Schematic Drawing, page 18

ITEM

DESCRIPTION

88

Adjusting Knob

89

Upper Nail Housing

90

Soft Grip Sleeve

ITEM

DESCRIPTION

91

O-Ring 48.5 x 2.5

92

End Cap

93

Air Plug

070710

GUARANTEE

Thank you for investing in a RONA tool. These products have been made to 

demanding, high quality standards and are guaranteed for domestic use against 

manufacturing faults for a period of 36 months from the date of purchase. 

This guarantee does not affect your statutory rights. In case of any malfunction of 

your RONA tool (failure, missing part, etc.), please call us toll-free at  

1 (888) 267-7713. In any communication, please be prepared to give all the 

information about your stand: model number, type, serial number, etc.

Normal wear and tear, including accessory wear, is not covered under guarantee. 

The product is guaranteed for 36 months if used for normal trade purposes. Any 

guarantee is invalid if the product has been overloaded or subject to neglect, 

improper use or an attempted repair other than by an authorised agent. Heavy 

duty, daily professional or hire usage are not guaranteed. Due to continuous 

product improvement, we reserve the right to change the product specification 

without prior notice.

Summary of Contents for RRN-COIL/11G-001



















Reviews: