Step 3 - Fitting the Door
1. Dismantle the Handle Assembly and re-assemble onto the Door Glass. Make sure the Plastic Gaskets are
fitted between the Handle and the Glass.
2. Place the setting block onto the bottom of the glass, ensuring the end marked “A” is on the glass.
3.
Lift the door assembly onto the tray and slide over the longer Wall Profile making certain that the setting
block is resting on top of the tray.
4. Decide whether the door will open inwards or outwards and slide the Frame Magnet into the channel on
the Vertical Frame and offer it over the shorter Wall Profile.
• Note: The image above shows the outward opening magnet configuration.
5. Open the door slightly and push the Door Magnet onto the Door Glass at the handle side.
②
NOTE: 2 people will be required to carry out these operations. Some parts are hidden for clarity reasons.
③
Ensure the
the block is
fitted with
the “A” on
the glass
①
⑤
④
Vertical Frame
Frame Magnet
Shorter Wall Profile
④