Step 1 - Preperation
1. Ensure the tray is completely level and check for any movement by standing in it - correct as necessary.
• Please ensure that the tray is installed as per the manufacturers instructions.
2. Seal the tray fully along the tiled walls prior to installation with a bathroom sealant (not supplied).
• Prior to fitting the enclosure and when the sealant has fully cured, spray the shower handset over the
joints and check for any leaks.
3.
IMPORTANT: Prior to installing/attempting to fit the Pivot Door into an alcove measure the opening at
the top, middle and bottom after all tiling and grouting has been done. Check this against the dimensions
given in the table shown above to see if your alcove meets the criteria.
• Check the plumbing for leaks.
• Do not plasterboard over the tray.
• Do not grout the tiles when the enclosure has been fitted as the grout may discolour the aluminium.
①
②
Product Code Minimum Alcove Size Maximum Alcove Size
N2F7613S
710mm
750mm
N2F813S
750mm
790mm
N2F913S
850mm
890mm
Measure at the top,
middle and bottom.
The dimensions must
meet the ones given
in the table below for
the respective product
size.
③
NOTE: The Pivot Door is designed to fit into an alcove between two tiled walls (as shown below).
