Important Safety Tips
4
Use/I
nstallation
Do not place the projector on soft materials such as carpets or sponge mats.
Otherwise, it will cause the projector body to overheat, which can cause burns, fire or damage
the projector.
Do not install the projector in a place that is damp or dusty, or where the projector may be
exposed to oil-smoke or steam.
Using the projector under this condition will result in fire, electric shock or component
deterioration. Oil may also distort the plastic and the projector may fall, such as when mounted
on a ceiling.
Do not install the projector in a place that is not strong enough to withstand the full
weight of the projector or on a sloping, unstable surface.
Otherwise, the projector may drop
or dump, resulting in personal injury or equipment damage.
Do not install the projector in a place where people pass through.
People may bump into the projector or trip over the power cord, which could result in fire, electric
shock, or injury.
WA
RNING
：
Do not cover the intake/exhaust vent. Otherwise, it may cause the projector body to
overheat, and cause fire or damage the projector.
Do not place containers of liquid or metal objects near the projector.
If liquid enters the projector, consult your dealer.
Please pay special attention to children.
Please use the specified ceiling mount bracket.
Using a non-designated ceiling mount bracket may cause the machine to fall.
Install the attached safety cable on the ceiling mount bracket to prevent the projector
from falling down.
Do not place the projector in narrow, poorly ventilated places.
Do not place the projector on rag or papers, as these materials could be easily drawn
into the intake vent.
Keep at least 1m (39-3/8'') between the exhaust vent and any wall or object, and keep
at least 50cm (19-11/16'') between the intake vent and any wall or object.
While using the projector, never look directly at the light from the lens or expose the
skin to such light.
Do not use optical devices (such as magnifiers or mirrors) to enter the projection beam. Doing
so may result in burns or impaired vision.
The projector lens emits strong light. Do not look directly at this light or expose your
hands directly to this light.
Please take special care not to allow children to look directly into the lens. In addition, when
you leave the projector, turn off the power and mains.
Do not attempt to refit or disassemble the projector.
High voltage may cause accidents such as fire or electric shock.
For any check, adjustment and repair work, please contact the designated service center.
Please avoid metal objects, combustibles or liquids from entering the projector. Do not
wet the projector. Failure to do so may result in a short circuit or excessive temperature, which
may result in fire, electric shock, or projector malfunction.