46
Using NETWORK CONTROL
Function
：
This function is suitable for remote control of the projector by computer in LAN.
Preparations
1
Required equipment: projector, computer, LAN cable;
2
Connection process
：
Connect the projector to a router or switch in the LAN with a direct or crossover
cable. If directly connect the projector and computer, they cannot be connected with
direct cable cannot, it is recommended to use a crossover cable.
3
When the computer is turned on and the projector is plugged in with power cord,
the indicators of the LAN interface and COMPUTER interface blink.
Using steps
1
Turn on the projector.
2
Get the network address, set DHCP to ON, and get the IP address automatically.
(If you are familiar with the network, you can manually set the IP address by setting
DHCP to OFF.)
3
Enter network menu settings.
(1)
Press the
MENU
button on
back
control panel or
remote control.
Press
▲▼
point button to select
the network icon.
(2)
Press
<OK>
button or
►
point
button to
enter NETWORK menu
.
(
3
)
Press
▲▼
point button to select
the
NETWORK SETTINGS, then
press <OK> button.
(
4
)
Press
▲▼
point button to set
DHCP to [ON], then press <OK>
button.
(
5
)
Press
▲▼
point button to
select
[YES], press select button, then
[Please wait...] screen appears, and
wait for it to disappear.