Important Safety Tips
3
WARNING
：
POWER
The wall outlet or circuit breakers shall be installed near the device to ensure easy insertion and
removal when problems occur. If the following problems occur, cut off the power supply immediately.
In these conditions, continued use of the projector will result in fire or electric shock, or will cause
visual impairment.
If foreign objects or water get inside the projector, cut off the power supply.
If the projector is dropped or the cabinet is broken, cut off the power supply.
If you notice smoke, strange smells or noise coming from the projector, cut off the power supply.
Please contact an Authorized Service Center for repairs, and do not attempt to repair the
projector yourself.
In case of thunderstorms, do not touch the projector and cables, otherwise, it may cause electric shock.
Do not damage the power or the power plug.
Using a damaged power cord may result in electric shock, short circuit or fire.
Do not damage, modify, excessively bend, twist, pull, wind the power cord, or place it close to a
hot object or place heavy objects on it.
Do not use the power cord other than the attached power cord, otherwise it will easily cause
electric shock or fire.
Note: If the device on the side of the power outlet is grounded without using the
supplied power cord, electric shock may occur.
Insert the power plug firmly into the wall outlet and ensure that the power connector is firmly
inserted into the projector power supply.
If the plug is not inserted correctly, it may result in electric shock or overheating.
Do not use a damaged power plug or a loose wall outlet.
When the hand is wet, do not touch the power plug or the power connector. Otherwise, it will
easily cause electric shock.
Do not overload the wall outlet.
If the power supply is overloaded (ex: excessive power strips inserted), it may cause excessive
temperatures or even a fire.
Clean the power plug regularly to prevent being covered by dust, otherwise it may cause a fire. If
dust builds up on the power plug, moisture in the dust may affect the insulation effect.