24
Connect the AC power
cord (supplied) to the
projector.
Connecting the AC Power Cord
The projector uses an AC power supply with
standard voltage of 100-240V, which can
automatically adapt to different input
voltages. This unit uses single-phase power
system with neutral grounding conductor.
To avoid the risk of electric shock, do not use
any other type of power system. If you are
uncertain of the type of power supply you are
using, consult an authorized dealer or service
station. Connect all the peripherals before
turning on the projector.
CAUTION
：
The AC power outlet should be close to the
projector and easy to plug and unplug.
CAUTION：
For your safety, unplug the AC power cord
when not using the projector. The projector is
in standby mode and consumes a little power
when connected to an outlet with an AC
power cord.
CAUTION
：
●
Use of incorrect cables may affect the product performance, and may even lead to
accidents such as electric shock or fire. To ensure product performance and safety, use
the same type of cable as the original cable.
●
Common connection cables include AC power cords, audio cables, video cables, serial
control cables, etc.
Precautions for power cord
The AC power cord must meet the requirements of the country or area where the projector is used.
Make sure that the type of AC power plug is the same as the figure below, and always use the
correct AC power cord.
If the supplied AC power cord does not match the AC outlet you use, contact your dealer.
Projector terminal
Terminal which connects to AC power outlet
Connect to AC power
outlet
Connect to the power cord
port of the projector
Ground