31
Remote control
KEYSTONE
CAUTION
：
•
•
When performing corner correction, switch
to the angle needs to be adjusted, the red
square becomes a red triangle. Press OK
button to turn it into a green triangle, and
then this corner can be corrected up and
down and left and right.
The arrow is white when there is no
correction and yellow when correcting.
•
Press EXIT button or MENU button to
return to previous menu.
•
When the keystone dialog box is displayed,
if the KEYSTONE button of the remote
control is pressed again, the keystone
adjustment will be canceled.
•
The adjustable range is limited by the input
signal.
K
eystone
If keystone distortion occurs in projected image, the image can be manually corrected by following
steps.
Press the KEYSTONE button of the remote control and the “KEYSTONE” box (including:
KEYSTONE UP AND DOWN, KEYSTONE LEFT AND RIGHT, CORNER
STONE
, RETURN TO
DEFAULT SETTINGS) displays. Press
point buttons to switch items, and press OK button to
select. Users can store the adjustment values of KEYSTONE.
•
The AUTO KEYSTONE function can only correct
vertical keystone distortion, but cannot correct
horizontal keystone distortion.
This function does not work when the CEILING
function in SETUP menu is set to ON.
AUTO SETUP function does not ensure complete
correction of image distortion.
The total points, horizontal and vertical position can be
adjusted entirely by AUTO PC ADJUST function. If the
image adjusted by this function is incorrect, adjust it
manually.
•
•
•
Press
◄
point button
to reduce the width
of upper part.
Press
►
point button
to reduce the width
of lower part.