45
A
UTO SETUP
S
OURCE SEARCH
,
AUTO KEYSTONE
, and
AUTO PC ADJUST
can be performed by pressing
the AUTO SETUP button on the top control panel or AUTO SETUP button on the remote
control.
These functional settings can be converted as follows:
S
OURCE SEARCH
This feature automatically detects the input signal. Search stops when the signal is found,
press
point button to select one of the following options:
OFF ........
ON .........
Non-use of the source search function.
Enable source search function in the following situations:
*
A
UTO PC ADJUST
ON.
........
OFF
........
Cancel the AUTO PC ADJUST.
A
UTO KEYSTONE
AUTO
...................
.......
.
.
MANUAL INPUT
........
OFF
........
...................
Disable AUTO KEYSTONE function.
CAUTION
If no display or freeze function is performed, cancel it to perform source search. This
function does not work when the on-screen menu is displayed.
•
Only the last selected source can be checked.
•
If you press the INPUT button on top control panel or SOURCE button on the remote control
during the source search, the source search will stop and return to the input signal used last time.
•
The AUTO KEYSTONE function corrects only vertical keystone distortion and does not correct
horizontal keystone distortion.
•
The AUTO KEYSTONE function does not work when the CEILING function in SETUP menu is set to
On.
•
The AUTO SETUP function can not ensure the complete correction of image distortion. Please press
the KEYSTONE button on the remote control or select KEYSTONE in SETUP menu to adjust
manually.
•
The horizontal and vertical position of some computers can be adjusted entirely through AUTO PC
ADJUST function. If the adjusted image of this function is not correct, use manual adjustment.
Press AUTO SSETUP in the menu settings to set the SOURCE SEARCH to ON and
the AUTO PC ADJUST function will turn on.
Press AUTO SETUP in the menu settings to set AUTO VERTICAL and
KEYSTONE to AUTO and the AUTO KEYSTONE function will turn on.
Cancel the AUTO KEYSTONE and go into manual mode.
- Pressing the AUTO SETUP button on top control panel.
- Pressing the AUTO SETUP button on the remote control.
► ►