manualshive.com logo in svg

Rollei Flash Unit 58F, Instructions Manual, Page: 43 / 56

Share
Download
Rollei Flash Unit 58F Instructions Manual Download Page 43

97

Wireless Instruction Mode (SLAVE C/SLAVE N) 

Slave C: 

This mode indicates that the wireless flash signal can only be received 

from the internal flash of the Canon 7D/60D/600D and the flashes 580II, 600EX as 
well as ST-E2 .   

Slave N: 

This mode indicates that the wireless flash signal can be received from 

the built-in Nikon flashes and the flashes SB-900/800/700 and SU-800 .   

Slave C/N: 

This mode supports 4 channels, 3 groups, TTL, manual and multi mode . 

Rotate the flash light head in the direction of the wireless master unit . Before the 
shooting you need to ensure that the slave units have the same channel as the  
master light . Repeatedly press the zoom button until the channel or group is high-
lighted and set the value of each . 

When working on the slave unit, please note that the flash brightness and the mode 
are completelay controlled by the master unit and on the slave unit's display only 
the received information is displayed . 

Summary of Contents for Flash Unit 58F

























































Reviews:

No comments