manualshive.com logo in svg

Rollei Flash Unit 58F, Instructions Manual, Page: 33 / 56

Share
Download
Rollei Flash Unit 58F Instructions Manual Download Page 33

87

Wireless Slave Mode (Wireless 2.4G SLAVE)

You can create 1 to 3 slave units and set a channel for each slave unit . When there 
are multiple slave units, please ensure that the slave units have the same channel 
as the master unit . 

Slave unit parameter setting 

Press the wireless option butten repeatedly until 2 .4G slave mode is shown on the 
display .   
1 .  Set the slave unit channel: Press the zoom button repeatedly until the number of 

channel is highlighted . Then rotate the dial to set the desired channel (1-16) .   

2 .  Set the slave unit group: Press the zoom button repeatedly until the group is 

highlighte . Then rotate the dial to set the desired group (A, B, C) . 

Note: 

The mode parameters and the focal length on the slave unit will be set by 

the master flash . 

Note: 

From the wireless transmitter the following modes can be received by the 

slave unit: E-TTL, iTTL, Manual, Multi, High Speed Sync .

Summary of Contents for Flash Unit 58F

























































Reviews:

No comments