manualshive.com logo in svg

Rollei Flash Unit 58F, Instructions Manual, Page: 27 / 56

Share
Download
Rollei Flash Unit 58F Instructions Manual Download Page 27

81

2.4G wireless master mode (Canon)

Multi Wireless MASTER mode (Wireless 2.4G MASTER Canon) 

Set the master unit into the multi mode . You can set up each slave unit in different 
flash light ratios . Use the master unit to finish all the settings . 

1.  Press the mode button on the master unit 

repeatedly until multi is shown on the  
display.  

 2. Press the zoom button repeatedly until ratio 

is highlighted.   

3. Select flash light ratio 

 

Rotate the dial to set the flash light ratio which can be <RATIO>, <RATIO A:B> 
or <RATIO A:B:C> . Select the flash ratio <RATIO> and all three slave unit groups 
will have the same bright output as the master flash . Select <RATIO A:B>  and the 
groups A and B will flash and the power output of the units in group A and B can 
be adjusted on each single unit . Select the flash light ratio >RATIO A:B:C> and all 
three groups will flash . The power output can be adjusted on each single unit . 

4. Set the flash frequency

  Press the middle button repeatedly until the frequency is highlighted . Rotate the dial 

to set the frequency which is available from 1HZ to 199HZ . After the value is set press 
the middle button again to enter the setting of the flash number and to exit . 

5. Set the times of flash

  Press the middle button repeatedly until the number of flashes is highlighted . 

Rotate the dial to set the number of strobe flashes which is available from 1 to 
40 . If the flash ration is set to <RATIO OFF> the maximum of number of strobes 
is limited by the flash output power . If the ratio is set to <RATIO A:B> or <RATIO 
A:B:C> the maximum times is limited by the output power of group A .

Summary of Contents for Flash Unit 58F

























































Reviews:

No comments