manualshive.com logo in svg

Rollei Flash Unit 58F, Instructions Manual, Page: 26 / 56

Share
Download
Rollei Flash Unit 58F Instructions Manual Download Page 26

80

2.4G wireless master mode (Canon)

Manual Wireless MASTER mode (Wireless 2.4G MASTER Canon)

Press the mode button repeatedly until m (manual) is shown on the display of the 
mater unit . Now you can set different flash light ratios for each slave unit group . 
Use the master unit to finish all the settings . 

1.  Press the mode button repeatedly until m 

is shown on the display.  

2.  Press down the zoom button repeatedly  

until <RATIO> is highlighted.

3. Select flash light ratio 

 

Rotate the dial to set the flash light ratio which can be <RATIO>, <RATIO A:B> 
or <RATIO A:B:C> . Select the flash ratio <RATIO> and all three slave unit groups 
will have the same bright output as the master flash . Select <RATIO A:B>  and 
the groups A and B will flash and the power output of the units in group A and 
B can be adjusted on each single unit . Select the flash light ratio >RATIO A:B:C> 
and all three groups will flash . The power output can be adjusted on each single 
unit . 

4. Set the flash output <RATIO A:B>or <RATIO A:B:C>

  Press  the middle button until group A is highlighted . Rotate the dial to set the 

power of group A .   

  Press the middle button until group B is highlighted . Rotate the dial to set the 

power of group B .  

  Press the middle button until group C is highlighted . Rotate the dial to set the 

power of group C .  

ENGLISH

Summary of Contents for Flash Unit 58F

























































Reviews:

No comments