62
ENGLISH
Basic operation
Turn ON/OFF power
Slide the switch from left to the right to turn it on and
vice versa to turn it off .
To save battery power and prevent battery leakage, the
flash unit is factory set to the following conditions by
default:
If the flash will not be operated within 60 seconds, it will automatically go into
the sleep mode . In this case press any button to wake up the flash . If the flash
unit is not used for a long period of time, it is recommended to use the main
power switch to turn it off and remove the batteries . Before removing the battery,
turn off the flash . After the flash capacitor is fully charged, the flash [ ] button
lights up, indicating that the flash is ready to trigger . This means that
the product can be used for the next shoot .
Charging Indicator
Before shooting, ensure the flash charging indicator
and the camera viewfinder lamp are on .
Extended interface
Through the expansion interface there is the PC
synchronous function .
Plug the sync cable into this socket to synchronize
flashes .
