80
ENGLISH
2.4G wireless transmitter
2.4G Slave Canon /Nikon (TTL, M, MULTI)
Press the wireless option button repeatedly until < > and [SLAVE] is shown on
the display .
In this mode the flash light can receive signals from Canon and Nikon TTL Master
light . It can flash although it is not attached to the camera . Before shooting set the
unit to the same frequency than the sender . Press the zoom button repeatedly on
the slave unit until the channel or group is highlighted and set the values .
On the slave unit you can switch between the manual and the multi mode and
change parameters like power or frequency . But note that the flash brightness
and the mode of the slave unit will be controlled by the transmitter if one is used .
Therefore please set the mode and group on the transmitter .
