92
ENGLISH
Multi Lighting Applications
1. 2.4G Light Applications
You can create multiple subordinate unit groups to complete the multi-directional
shooting needs . This unit is not directional, casually shooting in any corner
can be cited flash . The following modes can be set by the master unit: TTL, flash
ratio, manual flash output, strobe and so on .
1 . Wireless flash that consists of two slave unit groups
Set wireless options: SLAVE (2 .4G)
Set the communication channel: 1 ~ 16
Set up grouping: Set one flash as group A and the other as group B .
Set the main control unit: Set the communication channel: set the flash unit ratio
A: B or A: B: C, you can shoot flash (in Canon as an example)
2 . This unit consists of three slave groups
Set wireless options: SLAVE (2 .4G)
Set the communication channel: 1 ~ 16
Set the grouping: Set the three flash units to A, B, and C groups respectively
Set up the main unit and shoot
Set the communication channel: Set the flash ratio of the main control unit to
<A: B: C> (for Canon example)
Press the test button on the master unit to check whether the flash is normal:
If the slave unit is not flashing, check the communication channel and group of the
flash . They need to be all the same .
Note:
If the ratio <RATIO A: B> is set, the flash of group C will not fire .
If the group of three flash light is set <A>, they will be controlled by the MASTER
flash light .
