67
Flash light transmitter mode
Flash exposure lock (FEL/FV)
The “Flash Exposure Lock” locks the correct flash exposure setting for any part of
the scene . When <TTL> is displayed on the panel, please connect the flash to your
camera correctly . For Canon cameras press the “FEL”or “*”(AEL auto exposure lock)
button . For Nikon cameras press “FV” button . Then the flash will do a preflash and
the camera will calculate the appropriate flash output . At this point you have time
for re-composition . After finishing you can press the shutter release for shooting
pictures . (This feature requires you to use the camera support itself, therefore please
refer to your camera manual settings) .
Manual flash mode (M)
If a manual exposure is needed, you can set the value between the lowest power
(1/128) and full power (1/1) .
Select the flash mode
Press the mode button repeatedly until M is shown
on the display .
Power settings
1 . Press the left and the right button of the keypad to adjust the power value . Press
the right button to increase the value and the left one to decrease the value .
Icon: 1/128 –> 1/64 –> 1/32 –> . . . –> 1/1
Icon: 1/1 –> 1/2 –> 1/4 –> . . . –> 1/128
2 . Press the up and the down button of the keypad to do the fine-tuning of the
power value . Press the up button to increase the value and the down one to
decrease the value .
Icon: 0EV –> +0 .3EV –> +0 .7EV
Icon: 0EV –> -0 .3EV –> -0 .7EV
