88
ENGLISH
High-speed synchronization
High speed sync with flash attached to the camera can be achieved in
two ways:
1 . Wireless TTL trigger (flash device itself can support high speed sync)
2 . The flash is set to slave Canon or slave Nikon mode
a . You can also use high speed sync when the flash is not mounted on a camera
in Slave Canon mode .Therefore use the manual mode and use the built-in
flash as a wireless master flash . The maximum sync speed can only be set to
1/2000 or 1/250 . If the built-in flash is the master flash there is also a wireless
master control function needed to turn on high speed sync . If the master flash
is attached to the camera it will send the high speed sync information to the
slave unit .
b . In the slave Nikon mode you can also achieve high speed sync when it is not
attached to the camera . With the Nikon C command you can use the built-in
flash . Open the camera‘s automatic FP function therefore . If the built-in flash
is used it can only send data to the slave lights, they cannot do sync flash .
