rollease acmeda Automate Rechargeable Motorization Programming Instructions Manual Download Page 9

Page: 9 / 10

If using a 15 channel remote or wall switch; if the desired shade shares a channel with other shades, it is

recommended that it be moved to a new channel to program a Favorite position.

FAVORITE POSITION

Follow the steps in the

LINK REMOTE, CHANNEL, OR SWITCH

, on page 7, to link the shade to a

new channel. Once completed, the shade can be unlinked from the new channel. Follow the steps in the

UNLINK REMOTE, CHANNEL, OR SWITCH

, on page 7, to unlink the shade from the channel

1. Use the

and

STOP

buttons to move the shade to the desired “Favorite” position.

SETTING A FAVORITE POSITION

2. Press the

button. The shade will jog once followed by a beep.

3. Press the

STOP

button. The shade will jog once followed by a beep.

4. After the beep, press the

STOP

button a second time. The shade will jog 2 times then beep 3 times.

This confirms that the “Favorite” position has been set.

Hold the

STOP

button for approx. 2 seconds to move the shade to the saved “Favorite” position.

USING A FAVORITE POSITION

1. Press the

button. The shade will jog once followed by a beep.

DELETING A FAVORITE POSITION

2. Press the

STOP

button. The shade will jog once followed by a beep.

3. After the beep, press the

STOP

button a second time. The shade will jog once followed by a

longer beep. This confirms that the “Favorite” position has been deleted.

Up and Down

Channels

1 thru 5

Stop

ALL

WITCh

P2 B

UTTON

The

BACk

The

RemOTe

SWITCh

STOP

Down

Channel

INGLe

hANNeL

15 C

hANNeL

emOTe

Summary of Contents for Automate Rechargeable Motorization











Search results

Summary of Contents for Automate Rechargeable Motorization

Reviews:

Related manuals for Automate Rechargeable Motorization

Brands by name

Popular brands

rollease acmeda Automate Rechargeable Motorization, Programming Instructions Manual

Search results

Summary of Contents for Automate Rechargeable Motorization

Reviews:

Related manuals for Automate Rechargeable Motorization

Brands by name

Popular brands