LINK/UNLINK REMOTE OR SWITCH
When using the 15 channel remote or wall switch, multiple motors can be grouped onto channels for
coordinated control. Limit settings and favorite positions cannot be adjusted when motors are grouped together.
All shades linked to a remote or switch will also automatically be programmed to the “ALL” channel.
LINK REMOTE, CHANNEL, OR SWITCH
1. If using a 15 channel remote or wall switch, select which channel you would like the shade to be
programmed to using the
CHANNEL
button. If using a single channel remote, proceed to step 2.
2. Hold the
P1
button on the motor until the shade jogs once, release the button after the jog.
The shade will beep once confirming it’s ready to pair.
3. After the shade beeps, press and hold the
STOP
button until the shade jogs twice. Release the
button during the jogs. The shade will beep 3 times confirming that the remote has been paired.
UNLINK REMOTE, CHANNEL, OR SWITCH
The process to unlink a shade from a remote, channel, or switch is the same process as linking a shade.
1. If using a 15 channel remote or wall switch, select the channel with the shade you wish to remove
using the
CHANNEL
button. If using a single channel remote, proceed to step 2.
2. Hold the
P1
button on the motor until the shade jogs once, release the button after the jog.
The shade will beep once confirming it’s ready to be removed.
3. After the shade beeps, press and hold the
STOP
button until the shade jogs twice.
Release the button during the jogs. The shade will beep three times confirming that the shade
has been removed.
Up and Down
Channels
1 thru 5
Stop
W
ALL
S
WITCh
STOP
UP
Down
CH
Channel
S
INGLe
C
hANNeL
/
15 C
hANNeL
R
emOTe
7
