The upper and lower limits can be adjusted without having to factory reset the entire shade.
ADJUSTING LIMITS
8
NOTE:
Adjusting the limits can only be done with a single channel or 15 channel remote.
They cannot be adjusted with the wall switch.
If using a 15 channel remote, select the channel for the shade that needs to be adjusted. If there is more
than one shade on the channel, move the desired shade to its own channel before adjusting limits.
Follow the steps in the
LINK REMOTE, CHANNEL, OR SWITCH
, on page 7, to link the shade to a
new channel. Once completed, the shade can be unlinked from the new channel. Follow the steps in the
UNLINK REMOTE, CHANNEL, OR SWITCH
, on page 7, to unlink the shade from the channel.
NOTE:
The remote must be unlocked for the limits to be adjusted. If the remote is locked,
please see
LOCKING/UNLOCKING A REMOTE
on page 5.
1. Hold the
UP
and
STOP
buttons at the same time until the shade jogs once
(approx. 5 seconds.) The shade will beep once, this confirms the upper limit is
ready to be adjusted.
ADJUSTING UPPER LIMIT
2. Move the shade to the desired upper limit by using the
UP
or
DOWN
buttons.
Shade will move in short steps unless button is held.
3. Hold the
UP
and
STOP
buttons at the same time until the shade jogs 2 times
(approx. 5 seconds.) The shade will beep three times, this confirms the upper
limit is set.
1. Hold the
DOWN
and
STOP
buttons at the same time until the shade jogs once
(approx. 5 seconds.) The shade will beep once, this confirms the lower limit is
ready to be adjusted.
ADJUSTING LOWER LIMIT
2. Move the shade to the desired lower limit by using the
UP
or
DOWN
buttons.
Shade will move in short steps unless button is held.
3. Hold the
DOWN
and
STOP
buttons at the same time until the shade jogs 2 times
(approx. 5 seconds.) The shade will beep three times, this confirms the lower
limit is set.
