OPERATION
Use the
UP
and
DOWN
buttons to raise and lower the shade
SINGLE CHANNEL REMOTE
Use the
STOP
buttons to stop the shade anywhere along the travel.
STOP
UP
Down
To select which channel to operate, hold the
CHANNEL
button.
15 CHANNEL REMOTE
Once the number on the screen starts flashing, use the
UP
and
DOWN
buttons to select the desired channel.
NOTE:
If no button is pressed within 4 seconds, the current channel will automatically be confirmed.
Selecting channel “0” will operate all channels.
Press the
CHANNEL
or
STOP
button to confirm the selection.
Use the
UP
and
DOWN
buttons to raise and lower the shade.
Use the
STOP
button to stop the shade anywhere along the travel.
The
LEVELING CONTROL BAR
(located to the left of the remote) can be used
to visualize and accurately set your preferred shade position. When used to control
a group of shades, they will all perfectly align to the same position.
CH
To select which channel(s) to operate, press the desired channel button(s).
•
The blue LED will light up indicating the channel has been selected.
• To deselect a channel, press the channel button until the LED turns off.
WALL SWITCH
NOTE:
Wall switch requires that at least one channel be selected at all times.
First select an additional channel, then deselect channel that is no longer wanted.
Use the
UP
and
DOWN
buttons to raise and lower the shade.
Use the
STOP
button to stop the shade anywhere along the travel.
6
Hold the
STOP
button for approx. 2 seconds to move the shade to the saved “Favorite” position.
Hold the
STOP
button for approx. 2 seconds to move the shade to the saved “Favorite” position.
Hold the
STOP
button for approx. 2 seconds to move the shade to the saved “Favorite” position.
