Chargepoint Installation Completion
WallPod Intelligent EV Charging Unit
EVWM-V01-R1 Installation and Operation Manual
Page
29
of
35
December 2022
7. If the WallPod has anti-tamper
security built in, install the supplied
plugs into the front fascia securing
holes.
x
One plug contains a magnet
which is used as part of the anti-
tamper security system. The
magnet plug (shown here in
red) MUST be installed into the
top right-hand securing hole.
Figure 21 Anti-tamper Plug
NOTE:
The anti-tamper plug is marked with
a ‘
T
’ on its head.
8. Each plug must be installed into the
correct hole, and this will allow the
head of the plug to match the
shape of the charger.
9. Each plug has a ‘cut-out’ on one
side of its head. The cut-out must
face outwards to the right or left-
hand side of the charger.
Figure 22 Plug Cut-out
NOTE:
Plugs are single use only.
10. Orientate the plug to match the
shape of the charger then push it
firmly into the hole until the head of
the plug is level with the front of the
charger.
11. Make sure this manual is given to the Owner/Host before leaving the site.
Summary of Contents for WALLPOD ROLEC4020B
Page 1: ...INSTALLATION OPERATION MANUAL Manufactured in the UK WALLPOD Intelligent EV charging unit...
Page 37: ......
Page 38: ......
Page 39: ......
