145
MIDI Implementation
MIDI Implementation
❍
Vibrato Rate (Controller number 76)
Status
2nd byte
3rd byte
BnH
4CH
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Vibrato Rate value (relative change):
00H - 40H - 7FH (-64 - 0 - +63)
❍
Vibrato Depth (Controller number 77)
Status
2nd byte
3rd byte
BnH
4DH
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Vibrato Depth value (relative change):
00H - 40H - 7FH (-64 - 0 - +63)
❍
Vibrato Delay (Controller number 78)
Status
2nd byte
3rd byte
BnH
4EH
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Vibrato Delay value (relative change):
00H - 40H - 7FH (-64 - 0 - +63)
❍
Effect 1 (Reverb Send Level) (Controller number 91)
Status
2nd byte
3rd byte
BnH
5BH
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Reverb Send Level:
00H - 7FH (0 - 127)
❍
Effect 3 (Chorus Send Level) (Controller number 93)
Status
2nd byte
3rd byte
BnH
5DH
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Chorus Send Level:
00H - 7FH (0 - 127)
❍
RPN MSB/LSB (Controller number 100, 101)
Status
2nd byte
3rd byte
BnH
65H
mmH
BnH
64H
llH
n = MIDI channel number: 0H - FH (ch.1 - 16)
mm = upper byte (MSB) of parameter number specified by RPN
ll = lower byte (LSB) of parameter number specified by RPN
<<< RPN >>>
Control Changes include RPN (Registered Parameter Numbers), which are extended.
When using RPNs, first RPN (Controller numbers 100 and 101; they can be sent in any
order) should be sent in order to select the parameter, then
Data Entry (Controller numbers 6 and 38) should be sent to set the value. Once RPN
messages are received, Data Entry messages that is received at the same MIDI channel after
that are recognized as changing toward the value of the RPN messages. In order not to
make any mistakes, transmitting RPN Null is recommended after setting parameters you
need.
This device transmits the following RPNs.
RPN
Data entry
MSB, LSB
MSB, LSB
Notes
00H, 00H
mmH, llH
Pitch Bend Sensitivity
mm: 00H - 18H (0 - 24 semitones)
ll: ignored (processed as 00H)
00H, 01H
mmH, llH
Channel Fine Tuning
mm, ll: 20 00H - 40 00H - 60 00H
(-4096 x 100 / 8192 - 0 - +4096 x 100 / 8192 cent)
00H, 02H
mmH, llH
Channel Coarse Tuning
mm: 10H - 40H - 70H (-48 - 0 - +48 semitones)
ll: ignored (processed as 00H)
00H, 05H
mmH, llH
Modulation Depth Range
mm, ll:
00 00H - 06 00H
(0 - 16384 x 600 / 16384 cent)
7FH, 7FH
---, ---
RPN null
RPN and NRPN will be set as “unspecified.” Once
this setting has been made, subsequent
●
Program Change
Status
2nd byte
CnH
ppH
n = MIDI channel number:0H - FH (ch.1 - 16)
pp = Program number:00H - 7FH (prog.1 - prog.128)
Summary of Contents for XV-2020
Page 32: ...32 MEMO ...
Page 33: ...33 Quick Start Quick Start ...
Page 42: ...42 MEMO ...
Page 105: ...105 Appendix Appendix ...