manualshive.com logo in svg

Roland XV-2020, Owner'S Manual

The Roland XV-2020 offers an extensive range of high-quality sounds to enhance your musical creations. Unlock its full potential with the comprehensive Owner's Manual that you can easily download for free from our website. Discover endless possibilities and unleash your creativity with this exceptional synthesizer module.

Share
Download
background image

150

MIDI Implementation

|       00 1B | 0000 000a | Portamento Type                            (0 — 1) |
|             |           |                                        RATE, TIME  |
|       00 1C | 0000 000a | Portamento Start                           (0 — 1) |
|             |           |                                       PITCH, NOTE  |
|       00 1D | 0aaa aaaa | Portamento Time                          (0 — 127) |
|       00 1E | 0000 000a | Patch Clock Source                         (0 — 1) |
|             |           |                                     PATCH, SYSTEM  |
|#      00 1F | 0000 aaaa |                                                    |
|             | 0000 bbbb | Patch Tempo                             (20 — 250) |
|       00 21 | 0000 000a | One Shot Mode<*>                           (0 — 1) |
|             |           |                                           OFF, ON  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 22 | 0aaa aaaa | Cutoff Offset                            (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 23 | 0aaa aaaa | Resonance Offset                         (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 24 | 0aaa aaaa | Attack Time Offset                       (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 25 | 0aaa aaaa | Release Time Offset                      (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 26 | 0aaa aaaa | Velocity Sens Offset                     (1 — 127) |
|             |           |                                         —63 — +63  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 27 | 0000 aaaa | Patch Output Assign                       (0 — 13) |
|             |           |                          MFX, A, B<*>, C<*>, D<*>, |
|             |           |          1, 2, 3<*>, 4<*>, 5<*>, 6<*>, 7<*>, 8<*>, |
|             |           |                                              TONE  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 28 | 0000 000a | TMT Control Switch                         (0 — 1) |
|             |           |                                           OFF, ON  |
|       00 29 | 00aa aaaa | Pitch Bend Range Up                       (0 — 48) |
|       00 2A | 00aa aaaa | Pitch Bend Range Down                     (0 — 48) |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 2B | 0aaa aaaa | Matrix Control 1 Source                  (0 — 109) |
|             |           |                     OFF, CC01 — CC31, CC33 — CC95, |
|             |           |                  BEND, AFT, SYS1 — SYS4, VELOCITY, |
|             |           |                      KEYFOLLOW, TEMPO, LFO1, LFO2, |
|             |           |                         PIT—ENV, TVF—ENV, TVA—ENV  |
|       00 2C | 00aa aaaa | Matrix Control 1 Destination 1            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 2D | 0aaa aaaa | Matrix Control 1 Sens 1                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 2E | 00aa aaaa | Matrix Control 1 Destination 2            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 2F | 0aaa aaaa | Matrix Control 1 Sens 2                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 30 | 00aa aaaa | Matrix Control 1 Destination 3            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 31 | 0aaa aaaa | Matrix Control 1 Sens 3                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 32 | 00aa aaaa | Matrix Control 1 Destination 4            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 33 | 0aaa aaaa | Matrix Control 1 Sens 4                  (1 — 127) |
|             |           |                                         —63 — +63  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 34 | 0aaa aaaa | Matrix Control 2 Source                  (0 — 109) |
|             |           |                     OFF, CC01 — CC31, CC33 — CC95, |
|             |           |                  BEND, AFT, SYS1 — SYS4, VELOCITY, |
|             |           |                      KEYFOLLOW, TEMPO, LFO1, LFO2, |
|             |           |                         PIT—ENV, TVF—ENV, TVA—ENV  |
|       00 35 | 00aa aaaa | Matrix Control 2 Destination 1            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 36 | 0aaa aaaa | Matrix Control 2 Sens 1                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 37 | 00aa aaaa | Matrix Control 2 Destination 2            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 38 | 0aaa aaaa | Matrix Control 2 Sens 2                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 39 | 00aa aaaa | Matrix Control 2 Destination 3            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 3A | 0aaa aaaa | Matrix Control 2 Sens 3                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 3B | 00aa aaaa | Matrix Control 2 Destination 4            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |

|       00 3C | 0aaa aaaa | Matrix Control 2 Sens 4                  (1 — 127) |
|             |           |                                         —63 — +63  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 3D | 0aaa aaaa | Matrix Control 3 Source                  (0 — 109) |
|             |           |                     OFF, CC01 — CC31, CC33 — CC95, |
|             |           |                  BEND, AFT, SYS1 — SYS4, VELOCITY, |
|             |           |                      KEYFOLLOW, TEMPO, LFO1, LFO2, |
|             |           |                         PIT—ENV, TVF—ENV, TVA—ENV  |
|       00 3E | 00aa aaaa | Matrix Control 3 Destination 1            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 3F | 0aaa aaaa | Matrix Control 3 Sens 1                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 40 | 00aa aaaa | Matrix Control 3 Destination 2            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 41 | 0aaa aaaa | Matrix Control 3 Sens 2                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 42 | 00aa aaaa | Matrix Control 3 Destination 3            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 43 | 0aaa aaaa | Matrix Control 3 Sens 3                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 44 | 00aa aaaa | Matrix Control 3 Destination 4            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 45 | 0aaa aaaa | Matrix Control 3 Sens 4                  (1 — 127) |
|             |           |                                         —63 — +63  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 46 | 0aaa aaaa | Matrix Control 4 Source                  (0 — 109) |
|             |           |                     OFF, CC01 — CC31, CC33 — CC95, |
|             |           |                  BEND, AFT, SYS1 — SYS4, VELOCITY, |
|             |           |                      KEYFOLLOW, TEMPO, LFO1, LFO2, |
|             |           |                         PIT—ENV, TVF—ENV, TVA—ENV  |
|       00 47 | 00aa aaaa | Matrix Control 4 Destination 1            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 48 | 0aaa aaaa | Matrix Control 4 Sens 1                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 49 | 00aa aaaa | Matrix Control 4 Destination 2            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 4A | 0aaa aaaa | Matrix Control 4 Sens 2                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 4B | 00aa aaaa | Matrix Control 4 Destination 3            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 4C | 0aaa aaaa | Matrix Control 4 Sens 3                  (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 4D | 00aa aaaa | Matrix Control 4 Destination 4            (0 — 33) |
|             |           |                      OFF, PCH, CUT, RES, LEV, PAN, |
|             |           |                 DRY, CHO, REV, PIT—LFO1, PIT—LFO2, |
|             |           |            TVF—LFO1, TVF—LFO2, TVA—LFO1, TVA—LFO2, |
|             |           |          PAN—LFO1, PAN—LFO2, LFO1—RATE, LFO2—RATE, |
|             |           |                         PIT—ATK, PIT—DCY, PIT—REL, |
|             |           |                         TVF—ATK, TVF—DCY, TVF—REL, |
|             |           |                         TVA—ATK, TVA—DCY, TVA—REL, |
|             |           |                    TMT, FXM, MFX—CTRL1, MFX—CTRL2, |
|             |           |                              MFX—CTRL3, MFX—CTRL4  |
|       00 4E | 0aaa aaaa | Matrix Control 4 Sens 4                  (1 — 127) |
|             |           |                                         —63 — +63  |
|—————————————+————————————————————————————————————————————————————————————————|
| 00 00 00 4F | Total Size                                                     |
+——————————————————————————————————————————————————————————————————————————————+

❍

1-4-1-2 Patch Common MFX

+——————————————————————————————————————————————————————————————————————————————+
| Offset      |                                                                |
|     Address |                  Description                                   |
|—————————————+————————————————————————————————————————————————————————————————|
|       00 00 | 0aaa aaaa | MFX Type                                  (0 — 40) |
|       00 01 | 0aaa aaaa | MFX Dry Send Level                       (0 — 127) |
|       00 02 | 0aaa aaaa | MFX Chorus Send Level                    (0 — 127) |
|       00 03 | 0aaa aaaa | MFX Reverb Send Level                    (0 — 127) |
|       00 04 | 0000 00aa | MFX Output Assign                          (0 — 3) |
|             |           |                               A, B<*>, C<*>, D<*>  |
|—————————————+———————————+————————————————————————————————————————————————————|
|       00 05 | 0aaa aaaa | MFX Control 1 Source                     (0 — 101) |
|             |           |                     OFF, CC01 — CC31, CC33 — CC95, |
|             |           |                            BEND, AFT, SYS1 — SYS4  |
|       00 06 | 0aaa aaaa | MFX Control 1 Sens                       (1 — 127) |
|             |           |                                         —63 — +63  |
|       00 07 | 0aaa aaaa | MFX Control 2 Source                     (0 — 101) |
|             |           |                     OFF, CC01 — CC31, CC33 — CC95, |
|             |           |                            BEND, AFT, SYS1 — SYS4  |
|       00 08 | 0aaa aaaa | MFX Control 2 Sens                       (1 — 127) |
|             |           |                                         —63 — +63  |

Summary of Contents for XV-2020










































































































































































Reviews:

No comments

Related manuals for XV-2020

Kawai Synthesize K1RII Owner'S Manual preview
Synthesize K1RII
Brand: Kawai Pages: 54
i-nstruments SX-I User And Installation Manual preview
SX-I
Brand: i-nstruments Pages: 21
Keysight N5221BU-677 Installation Note preview
N5221BU-677
Brand: Keysight Pages: 54
Sonicware LIVEN 8bit warps User Manual preview
LIVEN 8bit warps
Brand: Sonicware Pages: 29
Sonicware LIVEN BASS&BEATS User Manual preview
LIVEN BASS&BEATS
Brand: Sonicware Pages: 48
Kawai DX205 Owner'S Manual preview
DX205
Brand: Kawai Pages: 28
Kawai Spectra KC10 Owner'S Manual preview
Spectra KC10
Brand: Kawai Pages: 74
Yamaha SY.22 Owner'S Manual preview
SY.22
Brand: Yamaha Pages: 76
Yamaha Montage 6 Supplementary Manual preview
Montage 6
Brand: Yamaha Pages: 60
Xaoc Devices KARL MARX STADT Operator'S Manual preview
KARL MARX STADT
Brand: Xaoc Devices Pages: 2
SPUTNIK MODULAR ENVELOPE FOLLOWER / PREAMP Manual preview
ENVELOPE FOLLOWER / PREAMP
Brand: SPUTNIK MODULAR Pages: 7

Brands by name

Popular brands

Load more brands