Menu List
8
AUDIO OUTPUT
Menu item
Value
Description
2nd level
3rd level
OUTPUT-1
:
OUTPUT-4
* This varies
according to model.
OUTPUT LEVEL
0 (-INF dB)–100 (0.0 dB)–127 (+6.0 dB) This adjusts the volume level of output audio.
OUTPUT MUTE
OFF, ON
This sets the Mute feature on or off. Output audio for which this is set to “ON” is
silenced.
OUTPUT DELAY
0 ms–60 ms–170 ms
This adjusts the delay time for output audio.
HDMI AUDIO CH
2ch, 5.1ch, 7.1ch
This sets the number of audio channels output via the HDMI OUTPUT connector.
DOWN MIX
OFF, STEREO > MONO, 5.1ch > STEREO,
5.1ch >MONO
This sets downmixing on or off.
STEREO > MONO:
This downmixes stereo audio and outputs it as monaural.
5.1ch > STEREO:
This downmixes 5.1-channel audio and outputs it as stereo.
5.1ch >MONO:
This downmixes 5.1-channel audio and outputs it as monaural.
4BAND EQUALIZER
OFF, ON
This sets the equalizer on or off.
HIGH GAIN
-15 dB–0 dB–15 dB
This boosts or attenuates the high band.
HIGH FREQ
600 Hz–8.00 kHz–12.0 kHz
This adjusts the center frequency when changing the sound quality in the high band.
HI-MID GAIN
-15 dB–0 dB–15 dB
This boosts or attenuates the high-midrange band.
HI-MID FREQ
20.0 Hz–2.50 kHz–10.0 kHz+
This adjusts the center frequency when changing the sound quality in the high-
midrange band.
HI-MID Q
0.50–1.00–16.0
This adjusts the bandwidth when boosting or attenuating the high-midrange band.
LOW-MID GAIN
-15 dB–0 dB–15 dB
This boosts or attenuates the low-midrange band.
LOW-MID FREQ
20.0 Hz–2.50 kHz–10.0 kHz
This adjusts the center frequency when changing the sound quality in the low-
midrange band.
LOW-MID Q
0.50–1.00–16.0
This adjusts the bandwidth when boosting or attenuating the low-midrange band.
LOW GAIN
-15 dB–0 dB–15 dB
This boosts or attenuates the low band.
LOW FREQ
50.0 Hz–112 Hz–800 Hz
This adjusts the center frequency when changing the sound quality in the low band.
GATE/COMPRESSOR
OFF, GATE, COMPRESSOR
This sets the gate or compressor on or off.
GATE-THRESHOLD
-50 dB– -48 dB–0 dB
This sets the level used as the threshold for removing audio. Audio that does not
reach the threshold level is removed.
GATE-RELEASE
30 ms–500 ms–5000 ms
This adjusts the length of time until the gate effect ends after audio falls below the
threshold.
COMP-THRESHOLD
-50 dB– -16 dB–0 dB
This sets the level used as the threshold when performing audio compression.
Compression is applied to audio that exceeds the threshold level.
COMP-RAITO
1.0: 1, 1.2: 1, 1.5: 1, 2.0: 1, 2.8: 1, 4.0: 1,
8.0: 1, 16: 1, INF: 1
This specifies the degree of compression applied to the audio. The state in which no
compression is applied is defined as “1.”
COMP-ATTACK
0.2 ms–50 ms–100 ms
This sets the time until the compression effect peaks after audio exceeding the
threshold is input.
COMP-KNEE
HARD, SOFT1–SOFT9
This adjusts the way in which the compressor is applied to the region near the
threshold level within a range extending from steep (HARD) to gentle (SOFT9).
COMP-RELEASE
30 ms–500 ms–5000 ms
This adjusts the length of time until compression ends after audio falls below the
threshold.
TEST TONE
OFF, ON
Setting this to “ON” outputs a test tone. The frequency of the test tone is fixed at
1 kHz (+4 dBu).
