background image

Menu List

13

*  The settings for the following menu items are not saved at individual presets. Only a single set is saved in the unit. After settings for menu items have 

been made, the new values are saved in the unit’s internal memory when you exit the menu.

BEZEL COMP

Menu item

Value

Description

2nd level

3rd level

OUT1-2 HORIZ PIX

(*28) (*29) —

-1000–0–1000

This adjusts the horizontal distance of OUTPUT1 and 2.

OUT2-3 HORIZ PIX

(*28) (*30) —

-1000–0–1000

This adjusts the horizontal distance of OUTPUT2 and 3.

OUT3-4 HORIZ PIX

(*28) (*31) —

-1000–0–1000

This adjusts the horizontal distance of OUTPUT3 and 4.

OUT1-3/2-4 VER LINE

(*29) (*31) —

-1000–0–1000

This adjusts the vertical distance of OUTPUT1 and 3 or OUTPUT2 and 4.

(*28):  This is enabled when “MODE” is one of the following. 

“SPAN-2”–“SPAN-4,” “ROTATION-L1”–“ROTATION-L4,” “ROTATION-R1”–“ROTATION-R4”

(*29):  This is enabled when “MODE” is “4K-1” or “4K-2.
(*30):  XS-83H/XS-84H only
(*31):  XS-84H only

COMMAND

Menu item

Value

Description

2nd level

3rd level

COMMAND-1 
 : 
COMMAND-32

TYPE

NONE, EPSON: Power ON, EPSON: Power OFF, EPSON: AV Mute ON, 
EPSON: AV Mute OFF, Panasonic: Power ON, Panasonic: Power OFF, 
Panasonic: Shutter ON, Panasonic: Shutter OFF, Panasonic: V-Mute ON, 
Panasonic: V-Mute OFF, Panasonic: A-Mute ON, Panasonic: A-Mute OFF, 
Sony: Power ON, Sony: Power OFF, Sony: V-Mute ON, Sony: V-Mute OFF, 
Sony: A-Mute ON, Sony: A-Mute OFF, Sony [NEW]: Power ON,  
Sony [NEW]: Power OFF, Sony [NEW]: V-Mute ON, Sony [NEW]: V-Mute OFF, 
Sony [NEW]: A-Mute ON, Sony [NEW]: A-Mute OFF 

This specifies the command to output.
*  For more information on command, refer to the chart below.

PORT

RS-232C, HDBaseT1, HDBaseT2, HDBaseT3, HDBaseT4

This sets the output destination for the command.

BAUD RATE

9600 bps, 19200 bps, 38400 bps, 115200 bps

This sets the baud rate (bit rate).
*  When “PORT” is set to “RS-232C,” the “RS-232C” menu “BAUD RATE” 

setting (p. 11) is applied.

COMMAND 
TIMING

OFF, STARTUP, PRESET1–32

This sets the timing for outputting commands.

STARTUP: This outputs commands at unit startup.
PRESET1–32: This outputs commands when a preset is recalled.

“TYPE” Settings and Command Values

Value

Command value

Description

EPSON: Power ON

PWR ON[CR]

This is the standard Power ON command for Epson projectors.

EPSON: Power OFF

PWR OFF[CR]

This is the standard Power OFF command for Epson projectors.

EPSON: AV Mute ON

MUTE ON[CR]

This is the standard AV Mute ON command for Epson projectors.

EPSON: AV Mute OFF

MUTE OFF[CR]

This is the standard AV Mute OFF command for Epson projectors.

Panasonic: Power ON

[STX]PON[ETX]

This is the standard Power ON command for Panasonic projectors and monitors.

Panasonic: Power OFF

[STX]POF[ETX]

This is the standard Power OFF command for Panasonic projectors and monitors. 

Panasonic: Shutter ON

[STX]OSH: 1[ETX]

This is the standard Shutter ON command for Panasonic projectors.

Panasonic: Shutter OFF

[STX]OSH: 0[ETX]

This is the standard Shutter OFF command for Panasonic projectors.

Panasonic: V-Mute ON

[STX]VMT: 1[ETX]

This is the standard Video Mute ON command for Panasonic monitors.

Panasonic: V-Mute OFF

[STX]VMT: 0[ETX]

This is the standard Video Mute OFF command for Panasonic monitors.

Panasonic: A-Mute ON

[STX]AMT: 1[ETX]

This is the standard Audio Mute ON command for Panasonic monitors.

Panasonic: A-Mute OFF

[STX]AMT: 0[ETX]

This is the standard Audio Mute OFF command for Panasonic monitors.

Sony: Power ON

A9h 01h 30h 00h 00h 01h 31h 9Ah

This is the standard Power ON command for Sony projectors.

Sony: Power OFF

A9h 01h 30h 00h 00h 00h 31h 9Ah

This is the standard Power OFF command for Sony projectors.

Sony: V-Mute ON

A9h 00h 30h 00h 00h 01h 31h 9Ah

This is the standard Video Mute ON command for Sony projectors.

Sony: V-Mute OFF

A9h 00h 30h 00h 00h 00h 30h 9Ah

This is the standard Video Mute OFF command for Sony projectors.

Sony: A-Mute ON

A9h 00h 31h 00h 00h 01h 31h 9Ah

This is the standard Audio Mute ON command for Sony projectors.

Sony: A-Mute OFF

A9h 00h 31h 00h 00h 00h 31h 9Ah

This is the standard Audio Mute OFF command for Sony projectors.

Summary of Contents for XS-82H

























Reviews: