Roland VersaArt RE-640 User Manual Download Page 9

Page: 9 / 140

Machine

Highlights

Part Names and Functions

Front cover inside/print head periphery

Grid rollers

These rollers feed out me-

dia toward the front of the

machine.

Platen

This is the path over which the me-

dia passes. A suction fan that keeps

the media from coming loose and

print heater that helps fix the ink

are built in.

Apron

This has a built-in dryer to

speed up drying of the ink.

Print-head carriage

The print head is inside this.

Media clamps

These keep the media from coming

loose and prevent fuzz on the cut

edge of the media from touching

the print head.

Pinch rollers

These clamp the media when

the loading lever is lowered.

Summary of Contents for VersaArt RE-640













































































































































Search results

Summary of Contents for VersaArt RE-640

Reviews:

Related manuals for VersaArt RE-640

Brands by name

Popular brands

Roland VersaArt RE-640, User Manual

Search results

Summary of Contents for VersaArt RE-640

Reviews:

Related manuals for VersaArt RE-640

Brands by name

Popular brands