manualshive.com logo in svg

Roland VersaArt RE-640, User Manual

The Roland VersaArt RE-640 is a cutting-edge printing solution designed for professionals. Enhance your productivity and creativity with this high-quality printer. To optimize your experience, we offer a comprehensive user manual for free download at our website, ensuring you maximize the potential of your RE-640.

Share
Download
background image

1

Machine

Highlights

 To Ensure Safe Use

15

 Danger of electrical short, shock, electrocution, or fire

 WARNING

Connect to an electrical outlet that com-

plies with this machine's ratings (for 

voltage, frequency, and current). 

Incorrect voltage or insufficient current may 
cause fire or electrical shock. 

Never use out of doors or in any loca-

tion where exposure to water or high 

humidity may occur. Never touch with 

wet hands. 

Doing so may result in fire or electrical 
shock. 

Never allow any foreign object to get 

inside. Never expose to liquid spills. 

Inserting objects such as coins or matches 
or allowing beverages to be spilled into the 

ventilation ports may result in fire or electrical 

shock. If anything gets inside, immediately 
disconnect the power cord and contact your 
authorized Roland DG Corp. dealer. 

Never place any flammable object nearby. 

Never use a combustible aerosol spray 

nearby. Never use in any location where 

gases can accumulate. 

Combustion or explosion may be a dan-
ger. 

 WARNING

Handle the power cord, plug, and electri-

cal outlet correctly and with care. Never 

use any article that is damaged. 

Using a damaged article may result in fire 

or electrical shock. 

When using an extension cord or power 

strip, use one that adequately satisfies 

the machine's ratings (for voltage, fre-

quency, and current). 

Use of multiple electrical loads on a single 
electrical outlet or of a lengthy extension 

cord may cause fire.

Connect to ground. 

This can prevent fire or electrical shock due 

to current leakage in the event of malfunc-
tion. 

Position so that the power plug is within 

immediate reach at all times. 

This is to enable quick disconnection of the 
power plug in the event of an emergency. In-
stall the machine next to an electrical outlet. 
Also, provide enough empty space to allow 
immediate access to the electrical outlet. 

If sparking, smoke, burning odor, unusual 

sound, or abnormal operation occurs, im-

mediately unplug the power cord. Never 

use if any component is damaged. 

Continuing to use the machine may result in 

fire, electrical shock, or injury. Contact your 

authorized Roland DG Corp. dealer.

Do not use the supplied power supply 

cord for other products.  

Ratings

Side view of 

the machine

Summary of Contents for VersaArt RE-640













































































































































Reviews:

No comments

Related manuals for VersaArt RE-640

Brands by name

Popular brands

Load more brands