Roland VersaArt RE-640 User Manual Download Page 5

Page: 5 / 140

Contents

Company names and product names are trademarks or registered trademarks of their respective holders.

http://www.rolanddg.com/

This document is a user’s manual for RE-640 ECO-SOL MAX ink model and RE-640 water-based pigment ink (FPG)
model.

System Management of Printer .................................................................110

Setting for the Menu Language and the Units of Measurement ............................... 110
Setting the Interval until Activation of the Sleep Mode (Power Saving Function) ...... 110
Viewing Information about the System of This Machine .............................................. 111
Returning All Settings to Their Initial Values...................................................................... 112

Chapter 6 Read this chapter whenever you face a problem. (FAQ) ............113

Printer Does Not Start Up! ........................................................................114

The Printer Unit Doesn't Run ................................................................................................... 114
The Media Heating System Doesn't Warm Up ................................................................. 115
Cannot cut off the media .......................................................................................................... 115

Attractive Printing is Impossible ................................................................116

Printed Results Are Coarse or Contain Horizontal Stripes ............................................ 116
Colors Are Unstable or Uneven .............................................................................................. 117
The Media Becomes Soiled When Printed .......................................................................... 118

Media Jam Occurs! ...................................................................................119

The Media Jams ............................................................................................................................ 119

Media Feed is Not Smooth ........................................................................120

Media Wrinkles or Shrinks ........................................................................................................ 120
Media Feed Is Not Straight ....................................................................................................... 121
Media Feed Is Not Smooth ....................................................................................................... 121

Print Head Stops Moving. Why? ...............................................................122

What to Do First ........................................................................................................................... 122
If the Heads Still Do Not Move ................................................................................................ 122

A Message Appears ..................................................................................124

An Error Message Appears .......................................................................126

Chapter 7Main Specifications

.........................................................................129

Printing Area ..............................................................................................130

Maximum Area and Margins ................................................................................................... 130
Maximum Area When Using Crop Marks ............................................................................ 131
The Media-cutoff Location During Continuous Printing .............................................. 131

Locations of the Power Rating and Serial Number Labels ........................132

Specifications ............................................................................................133

Summary of Contents for VersaArt RE-640













































































































































Search results

Summary of Contents for VersaArt RE-640

Reviews:

Related manuals for VersaArt RE-640

Brands by name

Popular brands

Roland VersaArt RE-640, User Manual

Search results

Summary of Contents for VersaArt RE-640

Reviews:

Related manuals for VersaArt RE-640

Brands by name

Popular brands