9
EnglishEnglish
Output Settings
PHONES
Assign or check the output to
the PHONES jack.
Output Level Meter
Indicates the level of the signal being output to the output jacks.
PATCH BAY
LINE OUT B L
LINE OUT B R
LINE OUT A L
LINE OUT A R
MUTE
PHONES
MUTE
MUTE
VOLUME
VOLUME
VOLUME
PHONES
Output volume slider
Adjusts the volume of the signal that is output to the
output jacks.
LINE OUT A
Assign or check the output to
the LINE OUT A jack.
LINE OUT B
Assign or check the output to
the LINE OUT B jack.
* This setting is unavailable
if the breakout box is not
connected to the main unit’s
I/O port.
PATCH BAY TYPE
You can change the signal flow within the patch bay. For details,
refer to p. 10.
D/A CONVERSION
Normally you should set this to [1 bit].
Turn it off in the following cases.
5
If the level meter of the connection-destination
moves even during times of silence.
5
If precise reproduction of the phase is the priority.
* This setting is off as the fixed value if the “PATCH
BAY TYPE” is [6 Channel].
MUTE
Specifies whether the sound is muted.
Patch bay input
Selects whether to output the signal of the direct mixer or the
signal of the computer.
Direct mixer
DIRECT MIX
Computer
OUT 1-2
OUT 3-4
OUT 5-6
2 Channel output destination
If “PATCH BAY TYPE” is [2 Channel], the sound is output
from the jacks that you click.
