Roland SP-300i, User Manual

Page: 78 / 134

4-4 Optimizing Printing or Cutting to Match Media Thickness
76
4
Feature Reference
3.
Enter the correction value.
Press .
Press .
Use to make the setting for the correction value.
Press to enable the setting.
4.
Go back to the original screen.
Press to go back to the original screen.
Description
The movement distance of media experiences subtle changes due to the thickness of the media and the temperature of the
media heating system. When the movement distance becomes discrepant, horizontal stripes are more likely to occur during
printing. We recommend performing correction to match the media you're using and the media heating system. Repeat the
process of printing a test pattern and entering a correction value several times to find the optimal value.
You can also make this setting on the computer (by, for example,choosing the media type in the software RIP you are using).
When you have made the setting on the computer, the computer's setting is used and the printer's setting is ignored.
Default Setting
[SETTING]: 0.00%
Performing Distance Correction During Cutting
Procedure

Press .
Press .

Press .
Press several times.
 Press .

Press .
Use to make the setting for the correction value.
Press to enable the setting for [FEED SETTING].
 Press .
Press .

Press .
Use to make the setting for the correction value.
Press to enable the setting for [SCAN SETTING].
SETTING
-0.40% 0.00%
W1200mm
MENU
CUTTING MENU
CUTTING MENU
CALIBRATION
CALIBRATION
FEED SETTING
FEED SETTING
0.00% 0.00%
CALIBRATION
SCAN SETTING
SCAN SETTING
0.00% 0.00%