22
Jumping to Locate Positions
Locating with the SEQUENCER Buttons
Hold down SHIFT and press:
•
BWD
—to jump backward in the song to the previous
locate position.
•
FWD
—to jump forward in the song to the next locate
position.
Jumping to Locate Positions in the Locate Window
1. In the Locate window, make sure F7 (Set) isn’t lit red. If it is,
press F7 (Set).
2. Press the desired Jump 1-4 button to move immediately to
Locate Positions 1-4, respectively.
Playback-Looping a Song Section
You can play a section of a song over and over as a loop.
Looped playback provides a way to enjoy, or even study, a
specific section of your song over and over again.
Setting Up a Playback Loop
On the Song Edit screen, press F5 (Loop/Locate)—the Loop
window appears.
Set the Repeat Times parameter to determine the number of
times the looped song section is to play back, from INF (for
“Infinite”), or 0 times to 99 times.
We recommend setting Repeat Times to INF, since you can always halt
playback by pressing the STOP button.
You can set the start and end of the looped section—called
the “loop points”—by dialing them in, or by placing them at
the desired song locations.
Dialing In Loop Points
1. In the Loop window, highlight the Start Point measure and
beat values and turn the VALUE dial to select the measure
and beat at which the song is to begin looping.
2. Highlight the End Point measure and beat values and turn
the VALUE dial to select the measure and beat at which the
song is to jump back to the Start Point location.
Placing Loop Points
1. While you’re in the Loop window, use RESET, BWD or
FWD—or simply play the song—to find the location in the
song at which you want looping to begin.
2. Press F5 (Set Start) to place the Start Point at the current
location.
3. Move to the song location at which you want playback to
jump back to the Start Point.
4. Press F6 (Set End) to place the End Point.
